Different Types of Indemnity and Their Relative Enforceability in Construction Litigation | JD Supra (2024)

Different Types of Indemnity and Their Relative Enforceability in Construction Litigation | JD Supra (1)

Indemnification is a term often thrown about in construction litigation, and you will see it in most standard form construction contracts. But what actually is it, and how useful is it to have when it comes to litigation in the construction context?

Indemnification is a means to shift the risk to some other party, regardless of who is at fault, such that one party, the indemnitor, is required to pay for the damages and costs incurred by another party, the indemnitee. You will often see indemnification clauses in contracts between project owners and general contractors, general contractors and subcontractors, and even owners and subcontractors via flow-down provisions in subcontracts.

There are three main types of indemnity, any one of which can provide indemnification.

Express Indemnity

Express indemnity, also sometimes called express contractual indemnity or simply contractual indemnity, is an indemnity clause that is specifically set out in a written contract. Based upon general contract principles, express indemnity is the most common type of indemnity. For example, a contract between a general contractor and a subcontractor may include an express indemnification provision whereby the subcontractor agrees to hold harmless the general contractor for all claims arising out of the contract, regardless of who is at fault.

There are three main types of express indemnity clauses: broad form, intermediate form, and limited form.

Broad Form Express Indemnity Clauses

Broad form express indemnity clauses require the indemnitor to hold the indemnitee harmless for all liability, even if the indemnitee is solely at fault. For example, a contract between a general contractor and a subcontractor may state that the subcontractor “shall indemnify the general contractor for claims arising out of the contract, whether caused in whole or in part by the negligence of the general contractor. It is specifically understood that this indemnity shall be interpreted as indemnifying the general contractor from its own sole and/or partial negligence.” Note that most states, including North Carolina, have statutes prohibiting this type of express indemnity clause.

Intermediate Form Express Indemnity Clauses

Intermediate form express indemnity clauses require the indemnitor to indemnify the indemnitee unless the indemnitee is solely at fault. In other words, if the indemnitor is 1% liable and the indemnitee is 99% liable, the indemnitor is still required to cover the entire loss. An example of an intermediate form express indemnity provision may state that the subcontractor “shall indemnify the general contractor for claims arising out of the contract, whether caused in whole or in part by the negligence of the general contractor. This clause is not intended to indemnify the general contractor for claims, damages, etc. caused by the sole negligence of the general contractor.” Approximately 50% of states, including North Carolina, statutorily prohibit the use of this type of express indemnity clause.

Limited Form Express Indemnity Clauses

Limited form express indemnity clauses require the indemnitor to indemnify the indemnitee, but only to the extent of the indemnitor’s own negligence. For example, a contract between a general contractor and a subcontractor may state that the subcontractor “shall indemnify the general contractor for claims arising out of the contract, but only to the extent caused in whole or in part by the negligent acts or omissions of the subcontractor.” Importantly, limited form express indemnity clauses are the most likely of the three types of express indemnity clauses to be enforceable, and most states, including North Carolina, allow them.

Practice Pointer: Because not all express indemnity clauses are legally enforceable, one way to ensure your client’s express indemnity clause is likely to be enforceable is to make sure it is a limited form indemnity clause.

Indemnity Implied-in-Fact

Even if a written construction contract between two parties does not include an express indemnity provision, one party may still be entitled to indemnification if there is indemnity implied-in-fact, also known as a contract implied-in-fact. Indemnity implied-in-fact stems from the existence of a binding contract (although it lacks an express indemnity clause) that necessarily implies the right to indemnification based upon the contracting parties’ relationship, the circ*mstances of their conduct, and their intent to create an indemnitor/indemnitee relationship.

For example, in McDonald v. Scarboro, the North Carolina Court of Appeals found there was indemnity implied-in-fact when, after Defendant Scarboro breached his contract with Plaintiff McDonald to begin working for co-Defendant McCrary, Scarboro testified that McCrary had verbally agreed to provide an attorney if McDonald sued Scarboro for breaching his contract. 370 S.E.2d 680, 91 N.C. App. 13 (N.C. Ct. App. 1988). Additionally, Scarboro was an employee of McCrary, and the establishment of the indemnification relationship was “at the essence of their intent to formulate their contractual master-servant relationship.” Kaleel Builders, Inc. v. Ashby, 587 S.E.2d 470, 474, 161 N.C. App. 34, 39 (N.C. Ct. App. 2003); 370 S.E.2d 680, 91 N.C. App. 13.

Practice Pointer: In reality, indemnity implied-in-fact is rarely pled or pursued in construction litigation. More often, indemnity is pursued based upon an express contractual provision or indemnity implied-in-law. So if you are assisting a client with contract drafting, make sure to discuss and include an express indemnity clause in the contract if the client so desires.

Indemnity Implied-in-Law

The third type of indemnity, called indemnity implied-in-law, arises from equitable concepts. For indemnity implied-in-law to exist, there must be an underlying injury sounding in tort, such as negligence; it cannot be based upon a breach of contractual obligations. In North Carolina, Courts have declined to recognize claims in tort where there was an underlying contract that governed the rights and duties of the parties. See, e.g., 587 S.E.2d 470, 474, 161 N.C. App. 34; Frye Regional Medical Center, Inc. v. Hostetter & Keach, Inc., 753 S.E.2d 741, 231 N.C. App. 170 (N.C. Ct. App. 2013) (unpublished disposition); Crescent Univ. City Venture, LLC v. AP Atlantic, Inc., 2019 WL 3765313 (N.C. Sup. Ct. Aug. 8, 2019) (unpublished). Thus, generally, indemnity implied-in-law is not available when there is an express written contract.

For there to be indemnity implied-in-law, the indemnitee must have imputed or derivative liability for the tortious conduct for which indemnity is sought. If a Court determines there to be indemnity implied-in-law, a passive tortfeasor will be required to pay the judgment owed by an active tortfeasor, to the injured party.

Practice Pointer: Usually claims for indemnity implied-in-law are brought by means of a third-party Complaint. Thus, if you are representing a client in construction litigation, make sure to evaluate the facts to determine if your client may be able to assert a claim for indemnity implied-in-law against any other parties.

Different Types of Indemnity and Their Relative Enforceability in Construction Litigation | JD Supra (2024)

FAQs

What are the different types of indemnification? ›

There are 3 levels of indemnification: broad form, intermediate form, and limited form.

What is an example of indemnity in construction? ›

For example, a contract between a general contractor and a subcontractor may state that the subcontractor “shall indemnify the general contractor for claims arising out of the contract, whether caused in whole or in part by the negligence of the general contractor.

What are indemnities in construction contracts? ›

An indemnity is an enforceable agreement by a party to compensate another party for loss, damage or expense. This may be in the form of a stand alone document or be part of a contract.

Which of the following are the modes of indemnity? ›

There are three main types of indemnity, any one of which can provide indemnification.
  • Express Indemnity. ...
  • Indemnity Implied-in-Fact. ...
  • Indemnity Implied-in-Law.
May 4, 2023

What are the different types of indemnity plans? ›

Copays and Coinsurance
Type of PlanAverage Coinsurance RatioCopays
Traditional IndemnityInsurer 80%, insured 20%None
Fixed IndemnityN/ANone
HMOInsurer 60-80%, Insured 20-40%Yes, copay amounts vary depending on the service
PPOInsurer 60-80%, Insured 20-40%Yes, copay amounts vary depending on the service
Apr 28, 2023

What are the different types of indemnity cover? ›

Typical examples of indemnity insurance include professional insurance policies like malpractice insurance and errors and omissions insurance (E&O). These special insurance policies indemnify or reimburse professionals against claims made as they conduct their business.

What is the indemnity clause in a contractor's agreement? ›

What Is an Indemnification Clause? An indemnification clause is a legally binding agreement between two parties specifying that one party (the indemnifying party) will compensate the other party (the indemnified party) for any losses or damages that may arise from a particular event or circ*mstance.

What is indemnity in civil procedure? ›

2772. Indemnity is a contract by which one engages to save another from a legal consequence of the conduct of one of the parties, or of some other person.

What is an example of legal indemnity? ›

Example: Indemnify and Hold Harmless Clause

The supplier agrees to indemnify and hold harmless the customer against all claims arising in respect of any injury, death, sickness or ill-health caused to or suffered by the customer and its personnel as a result of performance or non-performance of this Agreement.

What is a blanket indemnity? ›

Blanket contractual Liability can also be named “Hold harmless” or “indemnity” Agreements. These are basic agreements that go into the General Liability Coverage. It expresses that Party A (Indemnitor) promises to pay for whatever loss Party B (the indemnitee) faces.

What is reciprocal indemnity? ›

In broad terms, there are three types of indemnity or hold harmless clauses: RECIPROCAL: Both parties to the agreement or contract agree to compensate each other depending on whose negligence or actions caused the loss. This is also known as a mutual indemnification clause.

What is a narrow form of indemnity? ›

The narrowest form of indemnity is when the burden is on the project owner (e.g., the housing organization) to prove that a contractor was at fault. Broader forms of indemnity take the burden off the project owner to prove that a contractor was negligent.

What are the three principles of indemnity? ›

The principle of indemnity governs that an insurance contract compensates you for any damage, loss or injury caused only to the extent of the loss incurred. Insurance contract ensures that the insurer does not make a profit in the event of an incurred loss.

What is equitable implied indemnity? ›

Implied indemnity is an equitable doctrine that apportions responsibility among tortfeasors responsible for the same indivisible injury on a comparative fault basis.

What is an implied indemnity? ›

#2 Implied indemnity

This is an obligation to indemnify that arises, not from a written agreement, but more from circ*mstances or the conduct of parties involved. One practical example is an agent-principal business relationship.

What are the two types of basis of indemnity? ›

An indemnity costs order is intended to compensate a party as fully as feasible for the expense and inconvenience of litigation. One of the two bases on which expenses between parties in a lawsuit can be calculated is indemnity costs. Two bases are: standard basis and indemnity basis.

What is type 1 indemnity? ›

A Type I clause is one which expressly and unequivocally provides that the sub-contractor (indemnitor) is to indemnify the general contractor (indemnitee) for the negligence of the general contractor (indemnitee).

What is the difference between indemnification and mutual indemnification? ›

Indemnity clauses may be structured as mutual indemnification, where both parties agree to indemnify each other for specific types of losses, or they may be one-sided, where only one party agrees to indemnify the other. A mutual indemnification clause is a provision in which both parties agree to indemnify each other.

What are the different types of indemnification baskets? ›

One of our advisors will answer.

Baskets may be one of two types: a deductible basket or a tipping basket.

Top Articles
Latest Posts
Article information

Author: Carlyn Walter

Last Updated:

Views: 6204

Rating: 5 / 5 (50 voted)

Reviews: 81% of readers found this page helpful

Author information

Name: Carlyn Walter

Birthday: 1996-01-03

Address: Suite 452 40815 Denyse Extensions, Sengermouth, OR 42374

Phone: +8501809515404

Job: Manufacturing Technician

Hobby: Table tennis, Archery, Vacation, Metal detecting, Yo-yoing, Crocheting, Creative writing

Introduction: My name is Carlyn Walter, I am a lively, glamorous, healthy, clean, powerful, calm, combative person who loves writing and wants to share my knowledge and understanding with you.